Carlton Guitars
Ray Carlton Custom Guitars
Boronia Victoria Aust. email
0404 094 150

Model EB - Big-Squire #49-140616 - Sold -
Very smooth looking E type done in Inca Silver nitro. Tonerider Hot Classic alnico 3 lead for tele pickup with Carlton Esquire switching. Position one has volume only and without tone control engaged a raw hot tone is produced. Position two has tone engaged so a warm thick tone can be pre-set. The 3 or forward position has a shaped tone with emphasis on upper mids. Some highs and lows are filtered out making this setting ideal for solo work. It sounds devastating with overdrive and distortion.

Features a custom engraved neck plate and a Dynaguide string guide from the Netherlands. The Dynaguide is made from POM and stainless steel. POM is a very tough plastic. The Dynaguide offers no resistance to the strings and is an ideal solution for the age old binding on the string guide problem for trem equipped F style guitars. It is available on any of my guitars and through my workshop. see the clips section for a demo of Brett Kingman cutting loose on an E type with the same pickup and switching.


#49-140616 Model EB
#49-140616
#49-140616
#49-140616
From the client:
Hi Ray The guitar you made for my son is a credit to you. Not only does it look fantastic, it plays like a dream. The pick ups are very responsive and sound great. The Bigsby takes a bit of getting used to, but just adds to the class of the guitar. Once again thanks heaps - Might have to save up and get one of these for my own collection.
Cheers
Model - EB Big-squire
Serial Number: #49-140616
Neck - One piece Maple 9.5” radius, std C profile nitro tint
Body - Alder - Inca Silver nitro lacquer
Tuners - Gotoh SD91
Pickups - Tonerider hot classic lead for tele
Bridge - Vibramate V5-TEV Stage II - Bigsby B5 tremolo
Assembled weight - 3.8kg
Strings - EXL110 10-46
Nut - Graphtec Tusq
Switching - Carlton Esquire 3-way
Electronics - CTS pots, OrangeDrop caps, CRL switch, treble bleed, SwitchCraft jack


Carlton custom built instruments are made to exacting standards using top quality air dried tone-woods and the finest quality, industry standard hardware available. They are built by my hands from start to finish specifically for you. I I won't compromise quality for price. I am dedicated to creating fine tone unlike the multinational guitar factories that are dedicated to making money.
email or text - call - 0404 094 150 or

My work shop is in Melbourne’s outer east side. Contact me any time for a chat about how I can help get your instrument playing the way you need it to.

The workshop is in close proximity to the following suburbs
Bayswater, Belgrave, Boronia, Chirnside, Clematis, Croydon, Emerald, Ferntree Gully, Glen Waverley, Heathmont, Kallista, Kalorama, Kilsyth, Knoxfield, Liliydale, Lysterfield, Menzies Creek, Monbulk, Montrose, Mount Dandenong, Mt Evelyn, Olinda, Ringwood, Rowville, Scoresby, Selby, Tecoma, The Basin, The Patch, Upwey, Vermont, Wantirna, Wonga Park
.